فارسی – English

پیشرو تامین برزین
تامین تجهیزات ابزار دقیق و اتوماسیون صنعتی

  •

    Sick | Absolute encoders ARS60 SSI/Parallel

    At a glance:
    • Absolute singleturn encoder
    • Resolution: up to 15 bits (32,768 increments)
    • Electrical interface: SSI with gray code type or gray capped
    • Electrical interface: Parallel with gray, gray capped, binary, BCD code type
    • Zero-set function
    • Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
    • Enclosure rating: Up to IP66
    جزئیات

  • Krohne BM26 Magnetic Level Gauge

    The BM 26 is a simple, rugged instrument designed to indicate level or interface. It indicates level using a float magnetically coupled to an index or a column of rotating flaps. It is ideal for aggressive media stored in tanks when the PTFE lining option is used. For liquids with densities less than 0.5 kg/l / 31 lb/ft³, pressures more than 120 bar / 1740 psig and temperatures higher than 300°C / 570 °F, we recommend our BW 25 displacer-type level indicator.Highlights
    • Stainless steel design (optional NACE conformity)
    • Proven technology
    • Temperature range: -200…+300°C / -325…+570°F
    • Pressure range: -1…120 bar / -14.5…1740 psig
    • Density: 0.5…3 kg/l / 31…187 lb/ft³
    • Float material options: 316L, 316 Ti and Titanium
    • Stainless steel scale with wide choice of markings: m/cm, ft/in, %, volume etc.
    • Less risk of leakage than a sight glass - little or no maintenance needed
    • Easy to install
    • Ideal for tanks with obstructed environments
    • Optional indication of interface
    • Optional approvals for EEx i or EEx d applications
    Industries
    • Chemical and Petrochemical
    • Oil and Gas
    • Power
    Applications
    • Boilers
    • Condensators
    • Hydrocarbons and Separators
    • Liquid gas
    • Process and storage tanks
    • Steam cracking
    جزئیات

  • Krohne BW 25 Liquid level indicator

    Level measurement of liquids, even at high pressures using the displacement principle

    • Modular assembly, replacement or retrofit without interruption of the process
    • Pressure-tight separation of measuring and display parts
    • Interface detection possible
    • Displacement rod available 0.3 - 6 m (1 - 20 ft)
    • Resistant to high pressures ≤ 400 bar (5800 psig) and high temperature ≤ 400°C (752°F)
    • Current output 4...20 mA and/or max. 2 limit switches

    Application range

    The level indicator can be used for various liquids. This device is suitable for extreme operating conditions.

    • Temperatures '60 - +400°C ('76 - +752°F)
    • Pressure Up to 400 bar (5800 psig)

     If the display cannot be installed from above, e.g. there is an agitator in the vessel, it is possible to install it lateral in a special reference chamber. In both cases it is important to note that the non-measurable depth is 340 mm because of the spring mounting.

    With special versions it is possible to measure the interface between two immiscible liquids of different densities. The displacer must be covered completely with liquid. The difference in density should be min. 100 g/l.

    Typical products are:

    • Water, aqueous liquids
    • Acids/alkalis
    • Organic and inorganic solvents
    • All kind of pure liquids
    جزئیات

  • Krohne OPTIMASS 2000 Mass Flowmeters

    The Krohne OPTIMASS 2000 coriolis mass flow meter is a large diameter instrument developed to meet the demanding custody transfer requirements of the oil and gas industry. The high performance of the OPTIMASS 2000 also makes it a suitable flow meter for the bulk measurement of petroleum and oil as well as products like syrup, molasses and raw chemicals.d

    Features:

    High accuracy for custody transfer Innovative twin measuring tube design with optimised flow divider for minimum pressure loss Flow rates up to 2,300,000 kg/h /85,000 lbs/min. Standard flanges with ratings up to 1,500 lbs / PN160 Modular integrated electronics concept: electronics and sensor are easy to replace Optional heating jacket Large tube size for bulk measurement Best in class for zero stability Easily drained and easy to clean

    جزئیات

  • Krohne OPTIMASS 1000 Mass Flowmeters

    The OPTIMASS 1000 is the cost ef fective solution for accurate measurement for a variety of applications. The OPTIMASS 1000 reliably measures massflow, density, volume, temperature volume concentration or solid content
    Features:
    • Suitable for all standard applications up to 130°C
    • Hygienic connections make it ideal for food / beverage applications
    • Innovative twin measuring tubes
    • Easily drained and easy to clean
    • Resistant to installation and process effects
    • Long working life.
    • Optimized flow divider for minimum pressure loss.
    • High levels of accuracy means an excellent price / performance ratio.
    • Modular electronics with data redundancy - "plug & play" replacement of electronics
    Industries:
    • Water & wastewater
    • Chemical
    • Food & beverage
    • Paper & pulp
    • Petrochemical industry
    • Pharmaceutical industry
    جزئیات

  • Krohne H250/M40 Variable Area Flowmeter

    The new standard solution for the process industry. The H250/M40 flowmeters are setting a new standard in variable area flowmeter technology. They combine tried and tested flow measurement with latest communication capabilities like Foundation Fieldbus.

    The functionality of the devices is modular extendable. The innovative construction allows a free choice of intrinsically safe or flameproof design.

    The sturdy all-metal design, availabale in different materials, ensures high resistance to pressure, temperature and media and stands up to extreme application and environmental conditions. The new H250/M40 is the new standard solution for the process industry when costs and reliability are a factor.

    جزئیات

  • Krohne DK 32/34/37 Variable area flowmeter

    The DK 37 variable area flowmeters can either be equipped with a mechanical or electronic indicator and are suitable for measuring gases and liquids. They are sturdy, versatile all-metal measuring devices. All devices are fitted with a metering valve to accurately set the flow value.
    Its suitability for measuring the flow of gases in accordance with the DVGW G260 process sheet has been certified by the DVGW testing station at the Gas-Fired Thermal Energy Institute in Essen/Germany.d
    جزئیات

  • Krohne OPTISWITCH 4000

    OPTISWITCH 4000 series is a level sensor that uses a vibrating fork for detecting level. It is designed for use in all liquids. It is not affected by foam and external vibration. It is also unaffected by variations of product properties such as εr, viscosity etc.d

    OPTISWITCH 4000 - The economical version

    • Simple and robust measuring system, virtually unaffected by the chemical and physical properties of liquids
    • Easily mountable in pipelines from DN 25, vessels and tanks
    • Outputs: contactless electronic switch or transistor

    Features:

    • Output options: relay, transistor, NAMUR, contactless electronic switch and 2-wire
    • 5000 series: Plastic, aluminium or stainless steel housings
    • LED signal lamp for indicating the switching condition (with plastic housing only)
    • 5000 series: Large choice of materials for wetted parts. This includes 316L, Hastelloy C4, enamel, ECTFE and PFA.
    • 5000 series. Probe length: 53...6000 mm / 2...236"
    • Repeatability: +/-2 mm
    • Thread connections G/NPT ¾; flange sizes from DN25 PN40; Triclamp 1" or 2" and other hygienic fittings
    جزئیات

  • Krohne OPTISWITCH 5000

    OPTISWITCH 5000 series is a level sensor that uses a vibrating fork for detecting level. It is designed for use in all liquids. It is not affected by foam and external vibration. It is also unaffected by variations of product properties such as εr, viscosity etc.d

    Features:

    • Output options: relay, transistor, NAMUR, contactless electronic switch and 2-wire
    • 5000 series: Plastic, aluminium or stainless steel housings
    • LED signal lamp for indicating the switching condition (with plastic housing only)
    • 5000 series: Large choice of materials for wetted parts. This includes 316L, Hastelloy C4, enamel, ECTFE and PFA.
    • 5000 series. Probe length: 53...6000 mm / 2...236"
    • Repeatability: +/-2 mm
    • Thread connections G/NPT ¾; flange sizes from DN25 PN40; Triclamp 1" or 2" and other hygienic fittings

    OPTISWITCH 5100, 5150 - The compact version

    • Standard or HT version, large array of process fittings, housings and electronics
    • Outputs: relay, transistor, 2wire, NAMUR or contactless electronic switch
    • Process connection option for high temperature up to 250°C / 482°F
    • With all relevant approvals (ATEX etc.)
    • Version OPTISWITCH 5150 with polished tuning fork e.g. for food processing

    OPTISWITCH 5200, 5250 - The special version with probe extension

    • Standard or HT version, large array of process fittings, housings and electronics
    • Probe length up to 6000 mm / 236"
    • Outputs: relay, transistor, 2wire, NAMUR or contactless electronic switch
    • Process connection option for high temperature up to 250°C / 482°F
    • With all relevant approvals (ATEX etc.)
    • Version OPTISWITCH 5150 with polished tuning fork e.g. for food processing
    جزئیات

  • Siemens | SM 336 F Analog input modules

    Overview: - Analog inputs for the fail-safe SIMATIC S7 systems - Applicable in the ET 200M distributed I/O device with IM 153-2 HF as well as centrally with SIMATIC S7-31xF-2 DP - Properties of the SM 336; F-AI 6 x 0/4 - 20 mA HART:
    •     6 analog inputs with galvanic isolation between channels and backplane bus
    •     Input ranges: 0 to 20 mA, 4 to 20 mA
    •     Short-circuit proof power supply from 2 or 4-wire transducer via the module
    •     External encoder supply possible
    •     Applicable in safety mode
    •     HART communication
    •     Firmware update using HW Config
    •     Identification data
    Application: The modules are used centrally with SIMATIC S7-31xF-2 DP and in the ET 200M distributed I/O device together with SIMATIC IM 151-7 F-CPU, S7-31xF-2 DP, S7-416F-2 and S7-400F/FH. 0 to 20 mA and 4 to 20 mA current transmitters (also HART) can be connected as encoders.
    جزئیات

  • Siemens | SITRANS FM MAG 6000 Electromagnetic Flowmeter

    The SITRANS F M MAG 6000 I and the SITRANS F M MAG 6000 I Ex de transmitters have an measuring accuracy of + 0.2% of the flow rate and are designed to meet the demands of the process industry. Both versions are based on a microprocessor with a built-in alphanumeric display.

    جزئیات

  • Siemens | SITRANS LVS200 Vibration Level Switch

    SITRANS LVS200 is a vibrating point level switch for high or low levels of bulk solids. The standard LVS200 detects high, low or demand levels of dry bulk solids in bins, silos or hoppers. The liquid/solid interface version can also detect settled solids within liquids or solids within confined spaces such as feed pipes. It is designed to ignore liquids in order to detect the interface between a solid and a liquid. A pipe extension version is available with either the standard or liquid/solid interface electronics and fork, separated by a customer supplied 1" pipe. SITRANS LVS200 has an optional 4 to 20 mA output for monitoring buildup on the fork to determine when preventative maintenance should be performed in sticky applications. The LVS200 has a compact design and can be top, side or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged. A signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition.
    جزئیات

  • Siemens | temperature transmitter TF series

    SITRANS TF is used where other transmitters can't cope. One main point is its rating of IP67. SITRANS TF is made of rugged die cast aluminum or long-lasting stainless steel. It transforms resistance thermometers, thermocouples, Ohm and mV signals into a load independent DC current corresponding to sensor characteristic or a digital signal according Fieldbus standard Profibus PA or Foundation Fieldbus. The remote mounted sensor prevents the transmitter heating up at high temperature; there are no vibrations and oscillations due to long neck tubes and protective pipes with SITRANS TF. For tags with difficult access to you can mount your SITRANS TF remotely at easily accessible places and display the measured value on the freely programmable digital display (with version 4 to 20 mA). You can even use the SITRANS TF in a version without a transmitter as a comfortable field display unit for all 4 to 20 mA signals. All SITRANS TF are available in intrinsically safe or explosion proof version.
    جزئیات

  • Siemens | pressure transmitter DS III series

    SITRANS P pressure transmitters, DS III series, are digital pressure transmitters featuring extensive user-friendliness and high accuracy. Parameterization is performed using input keys or by means of HART communication. Extensive functionality enables the pressure transmitter to be precisely adapted to the plant’s requirements. Operation is very simple in spite of the numerous setting options. Transmitters with type of protection "Intrinsic safety" and "Explosion-proof" may be installed within potentially explosive atmospheres (zone 1) or in zone 0. The transmitters are provided with an EC type examination certificate and comply with the corresponding harmonized European standards (ATEX). The transmitters can be equipped with various designs of remote seals for special applications such as the measurement of highly viscous substances.
    جزئیات

  • Siemens Series 74 Valve Positioner

    The Model Series 74 Valve Positioners are universal positioners that provide versatility, dynamic performance, and high positioning accuracy. They use the piston ordiaphragm in a pneumatic actuator to position a valve to what is required by a control instrument and hold that position, regardless of the presence of forces that change valve position. As such, supply pressure variations have little or no effect on the positioner output, which eliminates the need for a supply pressure regulator.
    These valve positioners are two-stage, pilot-operated instruments. The pilot circuit activates dual-output boost-ers, which perform opposite actions (when one booster is supplying air, the other is exhausting air.) This “push-pull” action applies to a full differential (supply pressure to atmosphere) across the actuator to drive the valve to the position required by the control instrument signal.
    Model 74 Valve Positioners can also be used for single-acting service on a spring-loaded actuator. In this case, one of the pilot-booster connections is plugged. See below for rotary-type actuators.
    جزئیات

  • ABB | Electro-Pneumatic Positioner TZIDC-120

    The TZIDC-120 is an electronically configurable positioner with communication capabilities designed for mounting to linear or rotary actuators. Standard performance with FOUNDATION Fieldbus. The TZIDC-120 represents the digital, intelligent positioner for communication via FOUNDATION Fieldbus within the positioner family. Unmatched shock and vibration immunity of 10 g up to 80 Hz distinguishes the TZIDC-120 from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions. General specifications:
    • FOUNDATION Fieldbus communication
    • FF device registration: IT campaign no. IT 016800, ITK-Ver. 4
    • Easiest commissioning and operation on site due to local operation and auto adjustment
    • Worldwide Intrinsic Safety approvals
    • Robust design and flexible in use with linear and rotary actuators
    جزئیات

  • ABB | Digital positioner TZIDC-200

    The TZIDC-200 is an electronically configurable positioner with communication capabilities, mounting to linear or rotary actuators. Standard performance, flameproof enclosure, with 4 to 20 mA HART. The TZIDC-200 features a small and compact design, a modular construction, and an excellent cost-performance ratio. Fully automatic determination of the control parameters and adaptation to the final control element yield considerable time savings and an optimal control behavior. General specifications:
    • Worldwide approvals for Explosion Proof and Intrinsic Safety
    • Vibration immunity up to 10 g
    • Autostroke function serves for perfect adaption to valve - fully automatic
    • HART protocol as standard for full access to smart functions, diagnostics, maintenance and fault detection; also designed for fieldbus communication
    • One positioner for linear and rotary actuators
    جزئیات

  • ABB | Digital positioner EDP300

    The PositionMaster EDP300 is an electronically configurable positioner with communication capabilities designed for mounting to linear or rotary actuators. Advanced performance 4 to 20 mA with HART. The PositionMaster features a small and compact design, a modular construction, and an excellent cost-performance ratio. Fully automatic determination of the control parameters and adaptation to the positioner allow for considerable time savings as well as optimum control behavior. Because of its properties, the positioner is suited for even the most challenging operating conditions. General specifications:
    • Stainless steel housing
    • Non-contact position sensor
    • High air capacity
    • Operation with natural gas
    • Extended diagnostics
    • Graphical display
    • Universal analog input
    • Analog HART communication
    • Easy plug in modules
    • Worldwide Intrinsic Safety approvals
    • Remote sensor version
                  Advanced vibration resistance 2 g, 300 Hz Protection class IP 67
    جزئیات

  • ABB | AV Series Pneumatic and Electro-Pneumatic Valve Positioners

    Pneumatic and electro-pneumatic positioners AV1 & AV2 Type AV1 & AV2 Characterizable Positioners are control devices that satisfy a wide range of applications. They provide fast, sensitive, and accurate positioning of pneumatic single or double-acting, linear or rotary motion actuators. Overview: A mechanical connection from the actuator to a position feedback cam in the positioner establishes actual position. Three characterized segments on one cam provide application flexibility by establishing various relationships between input signal and actuator position. The relationships provided by the segments are square root, linear, and square. The Type AV1 positioner receives an external pneumatic signal and converts it to a pneumatic output. This output produces the motive force that positions the power actuator. The type AV2 positioner receives an external 4-20mA signal and converts it to a pneumatic output. This output produces the motive force that positions the power actuator Data:
    • Compact rugged design
    • High vibration and shock environments
    • Fast, accurate calibration
    • Single or double-acting without additional hardware
    • Vent design allows natural gas operation
    • Available with explosion-proof I/P converter
    جزئیات

  • ABB | SensyTemp WT R Temperature sensor

    Resistance thermometers with welded protection tube and measuring inset Description: The resistance thermometers with welded protection tube are used primarily for measuring temperatures in the operating range up to 600°C, 40 bar, 20 m/s in vessels and piplines. They are assembled from a welded protection tube featuring a connection head, into which an exchangeable measuring inset is fitted, and are used chiefly in liquid and gaseous media where moderate mechanical stress and low chemical aggressivity levels prevail. This design considerably facilitates the operational checks, since the measuring module – can be removed while the system is running without dismantling the entire sensor, – can be calibrated in the standard test facilities, – can be stocked as a universal standard module in order to assure availability of the system during replacement. In most cases, replacement by a new measuring inset is more reliable and less expensive than recalibration. Connection heads:
    • BUZ type, aluminium
    • BUZH type, aluminium, for install. of transmitter
    • BUKH type, polyamide, for install. of transmitter
    جزئیات

  • ABB | TTF300 Field Mounted Temperature Transmitter

    The TTF300 HART temperature transmitter in proven 2-wire technology features a multitude of new functions and enhanced diagnostic information. The driver-independent configuration possibilities of the TTF300 are new and unique through the LCD display controlled by temperature transmitter and the DAT200 (Asset Vision Basic) device management tool or the FDT / DTM technology.

    In addition the TTF300 is also available with Foundation Fieldbus and Profibus protocol with the same functionality.

    • Universal sensor input (RTD, thermocouple, Ohm, mV)
    • Various sensor error-calibration possibilities (one point, two point, Callendar-van-Dusen)
    • Sensor Backup / autom. Sensor redundancy switching (2 x Pt100 3-wire connection)
    • Freestyle characteristics (32 supporting points)
    • Output signal (temperature linear), 4 ... 20 mA, HART signal
    • Accuracy 0.1 %, long-term stability 0.05 % per year
    • IP 66 / IP 67, NEMA 4X aluminum or stainless steel field-mount housing
    • Transmitter-controlled LCD display with TTF300 configuration options
    جزئیات

  • ABB | TTH200 Head-mount temperature transmitter

    The TTH200 HART temperature transmitter is the standard device of the new TTx200 / TTx300 product family in proven two-wire technology. The TTH200 is provided for all HART standard applications in temperature measurement with one sensor. The transmitter supports the same functionality as the TTH300, but without sensor redundancy and sensor drift monitoring and can be configured via FDT / DTM in DAT200 (Asset Vision Basic) or any standard FTD tool via EDD. Data:
    • Universal sensor input
                  – RTD, thermocouple, Ω, mV
    • Various sensor error-calibration possibilities
                   – One point, two point
    • Output signal
                  – 4 to 20 mA, HART
    • Accuracy 0.1 %, long-term stability 0.05 % per year
    • Wire break / corrosion monitoring (NE89)
    • Extended diagnostics (NE107)
    • Approvals for explosion protection
                 – ATEX, IECEx, zone 0 – FM / CSA – GOST
    جزئیات

  • ABB | TTH300 Head-mount temperature transmitter

    The TTH300 HART, PROFIBUS PA or FOUNDATION Fieldbus temperature transmitter in proven two-wire technology features a multitude of new functions and enhanced diagnostic information. The head-mount temperature transmitter can be configured via FDT / DTM in DAT200 (Asset Vision Basic) or any standard FTD tool via EDD or local HMI (optional). For PROFIBUS the configuration is possible via GST-file, EDD or DTM and for FOUNDATION Fieldbus via EDD.Data:
    • Universal sensor input
                  – RTD, thermocouple, Ω, mV
    • Various sensor error-calibration possibilities
                  – One point, two point, Callendar-van-Dusen
    • Sensor backup / automatic sensor redundancy switching (2 x Pt100 3-wire connection)
    • Freestyle characteristics
                  – 32 supporting points
    • Output signal
                  – 4 to 20 mA, HART – PROFIBUS PA 3.01 – FOUNDATION Fieldbus ITK 5.2
    • Accuracy 0.1 %, long-term stability 0.05 % per year
    • Wire break / corrosion monitoring (NE89)
    • Extended diagnostics (NE107)
    • Approvals for explosion protection
                 – ATEX, IECEx, zone 0 – FM / CSA – GOST
    جزئیات

  • ABB | FF Pressure Switch

    The new FF pressure switch design is based on 40 years of know-how and is an example for consequent quality oriented development. The ingenious construction without linkages or pivot points and with only a few moving parts has many excellent features.
    Designed for modern manufacturing with automation, this new FF pressure switch will also be economically a good choice because it's construction is designed for the future. Considering the many customer applications, this new switch has the same mounting bracket configuration and therefore can successfully replace our earlier FF4 pressure switch. Features:
    • Very little movement of sensing element, long life rate
    • Measuring system without friction, no wear or tear: no scheduled maintance needed
    • Micro Switch with instrument quality, precise set point repeatability
    • Adjustments of set point and hysteresis (dead band) are individual without interference and therefore quick and simple
    • Rugged construction, high material qualitity, fine silver or gold plated contact material
    • Various approvals available
    جزئیات

  • ABB | 264DS Differential Pressure Transmitter

    The ABB 264DS Differential Pressure Transmitter measures a wide range of differential pressures. Ranges are available from .54 in H2O to 2320 psi. The diaphragm material along with process flanges are available in several different materials such as 316 stainless steel, Hastelloy C276, Tantalum and Monel 400. Several choices of fill fluids and process connections are offered and there are all the 2600T options to choose from such as HART / 4-20 mA, PROFIBUS PA, and FOUNDATION Fieldbus communications. There are also optional output meters and a new integral digital LCD display which allows configuration ability at the transmitter. The 264DS is backed by a 5 year stability warranty which guarantees long term performance.
    جزئیات

  • ABB | 264HS Gauge Pressure Transmitters

    Model 264HS is a high overload gauge pressure transmitter with a maximum working pressure up to 90MPa, 13050psi. It comprises a reliable sensing system coupled with the very latest digital technologies, providing a large turn down ratio up to 100:1. The user has a comprehensive choice of sensors and is therefore able to optimize in-use total performance and stability. Configuration facilities are provided locally via local keys combined with LCD indicator or via hand held terminal or PC configuration platform. Features:
    • Base accuracy : ±0.075%
    • Span limits 0.65 to 60000kPa; 2.6inH2O to 8700psi
    • 5–year stability
    • Multiple protocol availability – provides integration with HART®, PROFIBUS PA and FOUNDATION Fieldbus platforms offering interchangeability and transmitter upgrade capabilities
    • Full compliance with PED Category IV – suitable for safety accessory application
    جزئیات

  • ABB | 266 MRT Differential Pressure Transmitter

    Model 266MRT is a differential pressure transmitter with “multisensor technology” suitable for measuring liquid, gas or steam flow as well as level, pressure and density characterized by the remote seal construction. The unique combination of several sensor systems in a single device allows simultaneous measurement of differential pressure and absolute pressure. The sensor temperature and the absolute pressure are also used for eliminating environmental effects on the sensor. Thanks to Taylor’s “All-Welded” technology in remote seal manufacturing as well as to the longstanding expertise, 266MRT can offer unmatched total performances and a wide selection of options such as fill fluid, diaphragm material, capillary protection and mounting connections. ABB, leader in severe process measurements, is able to provide the right solution for the most critical process media at extreme ambient and process conditions. Long-term stability and proven reliability are the key-factors that make of 266MRT the best choice for differential pressure measurement This transmitter features in-field replaceable electronics module that thanks to the auto-configuration functionality dramatically improves plant productivity. Its intuitive plug-and-play display with easy setup procedure really helps users by saving time and lowering maintenance and inventory costs. Moreover, the innovative TTG (Through The Glass) technology allows users to configure the instruments in the field without removing the windowed front cover and consequently to save a lot of time. Thanks to the IEC61508 certification (SIL2/SIL3 loops) the 266MRT represents the smartest solution in Safety loop applications. 266MRT: smartness beyond performances.
    • Base accuracy : ±0.04%
    • Span limits: 0.6 kPa ... 10000 kPa; 2.41 in. H2O ... 1450 psi
    • Multiple protocol availability – provides integration with HART®, PROFIBUS PA and FOUNDATION Fieldbus platforms offering interchangeability and transmitter upgrade capabilities
    • Full compliance with PED Category III
    جزئیات

  • Krohne Variable area flowmeters H250 / M9

    The H 250 flowmeter for measurement of the volumetric or mass flow rate of liquids, gases and steam is an all-metal flowmeter that operates on the float measuring principle. The flow-dependent vertical position of the float in the measuring tube is transmitted by a magnetic coupling system to the scale in the indicator part. The flowmeter is installed in a vertical pipe run, with flow from bottom to top. Owing to its rugged design, the H 250 variable-area flowmeter is particularly suitable for difficult applications and environmental conditions.D In the M9 indicator, the vertical position of the float is transmitted to the pointer/ magnet system, and the flow value indicated directly on the scale.D
    جزئیات

  • Krohne OPTIMASS 7000 Mass Flowmeters

    The Krohne OPTIMASS 7000 coriolis mass flow meter is the optimum meter for demanding mass flow and density measurement applications of fluids, gases and solids. Featuring a single straight titanium measuring tube, the OPTIMASS 7000 is ideal for use in applications involving highly corrosive fluids, custody transfer, non-homogenous mixtures, and slurries.d

    Features:

    • Outer cylinder typical burst pressure greater than 100 barg / 1450 psig, with optional PED approved secondary pressure containment available
    • Easily drained and easy to clean
    • Resistant to installation and process effects
    • Excellent zero stability
    • Low energy consumption, means lower operating costs
    • Rapid signal processing, even with product / temperature changes
    • Modular electronics with data redundancy - "plug & play" replacement of electronics
    جزئیات

  • Krohne OPTIMASS 6000 Mass Flowmeters

    A high level of performance, together with a wide operating temperature range up to 400°C /752°F, makes the OPTIMASS 6000 the ideal choice for mass flow measurement in a wide variety of applications.d Designed to meet the requirements of general purpose liquid and gas applications, the extended low temperature range of -200°C / -328°F also makes the 6000 suitable for Liquid Natural Gas (LNG) and cryogenic applications.d Combined with the power of the MFC 400, the OPTIMASS 6000 will provide accurate measurement of volume, mass, density and concentration.d
    Features:
    • Innovative twin V-tube design
    • Temperature range -200°C to +400°C
    • Optional insulation / heating jacket
    • Compact envelope
    • Optimised flow divider for minimum pressure loss
    • Modular electronics concept: electronics and sensor are easy to replace
    • Self draining when mounted vertically
    • Stability with entrained gas, even with gas concentrations 0...100%
    جزئیات

عنوان

درباره ما :

شرکت پیشرو تامین برزین به عنوان مجموعه‌ای پیشتاز در زمینه واردات و عرضه تجهیـزات ابـزاردقیـق و اتوماسیون صنعتی از معتبرترین تولیدکنندگان اروپا و آمریکا در ایران فعالیت‌‌ می‌نماید.

دانلود :

برای دریافت فایلهای شرکت کلیک کنید

تماس با ما :

آدرس :تهران میدان آرژانتین خیابان الوند خیابان ۲۹ نبش خ زاگرس پلاک۱۳ طبقه سوم واحد ۱۴
تلفن :  02188195745
02188196075
02188198203
واتساپ : 09194744260
فکس:  02188196712
ایمیل : info@ptbarzin.com

کلیه ی حقوق مادی و معنوی این وب سایت متعلق به شرکت پیشرو تامین برزین می باشد
بازگشت به بالا