The ABB 264DS Differential Pressure Transmitter measures a wide range of differential pressures. Ranges are available from .54 in H2O to 2320 psi. The diaphragm material along with process flanges are available in several different materials such as 316 stainless steel, Hastelloy C276, Tantalum and Monel 400. Several choices of fill fluids and process connections are offered and there are all the 2600T options to choose from such as HART / 4-20 mA, PROFIBUS PA, and FOUNDATION Fieldbus communications. There are also optional output meters and a new integral digital LCD display which allows configuration ability at the transmitter. The 264DS is backed by a 5 year stability warranty which guarantees long term performance.
-
Model 264HS is a high overload gauge pressure transmitter with a maximum working pressure up to 90MPa, 13050psi. It comprises a reliable sensing system coupled with the very latest digital technologies, providing a large turn down ratio up to 100:1. The user has a comprehensive choice of sensors and is therefore able to optimize in-use total performance and stability. Configuration facilities are provided locally via local keys combined with LCD indicator or via hand held terminal or PC configuration platform. Features:- Base accuracy : ±0.075%
- Span limits 0.65 to 60000kPa; 2.6inH2O to 8700psi
- 5–year stability
- Multiple protocol availability – provides integration with HART®, PROFIBUS PA and FOUNDATION Fieldbus platforms offering interchangeability and transmitter upgrade capabilities
- Full compliance with PED Category IV – suitable for safety accessory application
-
Model 266MRT is a differential pressure transmitter with “multisensor technology” suitable for measuring liquid, gas or steam flow as well as level, pressure and density characterized by the remote seal construction. The unique combination of several sensor systems in a single device allows simultaneous measurement of differential pressure and absolute pressure. The sensor temperature and the absolute pressure are also used for eliminating environmental effects on the sensor. Thanks to Taylor’s “All-Welded” technology in remote seal manufacturing as well as to the longstanding expertise, 266MRT can offer unmatched total performances and a wide selection of options such as fill fluid, diaphragm material, capillary protection and mounting connections. ABB, leader in severe process measurements, is able to provide the right solution for the most critical process media at extreme ambient and process conditions. Long-term stability and proven reliability are the key-factors that make of 266MRT the best choice for differential pressure measurement This transmitter features in-field replaceable electronics module that thanks to the auto-configuration functionality dramatically improves plant productivity. Its intuitive plug-and-play display with easy setup procedure really helps users by saving time and lowering maintenance and inventory costs. Moreover, the innovative TTG (Through The Glass) technology allows users to configure the instruments in the field without removing the windowed front cover and consequently to save a lot of time. Thanks to the IEC61508 certification (SIL2/SIL3 loops) the 266MRT represents the smartest solution in Safety loop applications. 266MRT: smartness beyond performances.- Base accuracy : ±0.04%
- Span limits: 0.6 kPa ... 10000 kPa; 2.41 in. H2O ... 1450 psi
- Multiple protocol availability – provides integration with HART®, PROFIBUS PA and FOUNDATION Fieldbus platforms offering interchangeability and transmitter upgrade capabilities
- Full compliance with PED Category III
-
Pneumatic and electro-pneumatic positioners AV1 & AV2 Type AV1 & AV2 Characterizable Positioners are control devices that satisfy a wide range of applications. They provide fast, sensitive, and accurate positioning of pneumatic single or double-acting, linear or rotary motion actuators. Overview: A mechanical connection from the actuator to a position feedback cam in the positioner establishes actual position. Three characterized segments on one cam provide application flexibility by establishing various relationships between input signal and actuator position. The relationships provided by the segments are square root, linear, and square. The Type AV1 positioner receives an external pneumatic signal and converts it to a pneumatic output. This output produces the motive force that positions the power actuator. The type AV2 positioner receives an external 4-20mA signal and converts it to a pneumatic output. This output produces the motive force that positions the power actuator Data:- Compact rugged design
- High vibration and shock environments
- Fast, accurate calibration
- Single or double-acting without additional hardware
- Vent design allows natural gas operation
- Available with explosion-proof I/P converter
-
The PositionMaster EDP300 is an electronically configurable positioner with communication capabilities designed for mounting to linear or rotary actuators. Advanced performance 4 to 20 mA with HART. The PositionMaster features a small and compact design, a modular construction, and an excellent cost-performance ratio. Fully automatic determination of the control parameters and adaptation to the positioner allow for considerable time savings as well as optimum control behavior. Because of its properties, the positioner is suited for even the most challenging operating conditions. General specifications:- Stainless steel housing
- Non-contact position sensor
- High air capacity
- Operation with natural gas
- Extended diagnostics
- Graphical display
- Universal analog input
- Analog HART communication
- Easy plug in modules
- Worldwide Intrinsic Safety approvals
- Remote sensor version
-
The TZIDC-200 is an electronically configurable positioner with communication capabilities, mounting to linear or rotary actuators. Standard performance, flameproof enclosure, with 4 to 20 mA HART. The TZIDC-200 features a small and compact design, a modular construction, and an excellent cost-performance ratio. Fully automatic determination of the control parameters and adaptation to the final control element yield considerable time savings and an optimal control behavior. General specifications:- Worldwide approvals for Explosion Proof and Intrinsic Safety
- Vibration immunity up to 10 g
- Autostroke function serves for perfect adaption to valve - fully automatic
- HART protocol as standard for full access to smart functions, diagnostics, maintenance and fault detection; also designed for fieldbus communication
- One positioner for linear and rotary actuators
-
The TZIDC-120 is an electronically configurable positioner with communication capabilities designed for mounting to linear or rotary actuators. Standard performance with FOUNDATION Fieldbus. The TZIDC-120 represents the digital, intelligent positioner for communication via FOUNDATION Fieldbus within the positioner family. Unmatched shock and vibration immunity of 10 g up to 80 Hz distinguishes the TZIDC-120 from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions. General specifications:- FOUNDATION Fieldbus communication
- FF device registration: IT campaign no. IT 016800, ITK-Ver. 4
- Easiest commissioning and operation on site due to local operation and auto adjustment
- Worldwide Intrinsic Safety approvals
- Robust design and flexible in use with linear and rotary actuators
-
The new FF pressure switch design is based on 40 years of know-how and is an example for consequent quality oriented development. The ingenious construction without linkages or pivot points and with only a few moving parts has many excellent features.Designed for modern manufacturing with automation, this new FF pressure switch will also be economically a good choice because it's construction is designed for the future. Considering the many customer applications, this new switch has the same mounting bracket configuration and therefore can successfully replace our earlier FF4 pressure switch. Features:- Very little movement of sensing element, long life rate
- Measuring system without friction, no wear or tear: no scheduled maintance needed
- Micro Switch with instrument quality, precise set point repeatability
- Adjustments of set point and hysteresis (dead band) are individual without interference and therefore quick and simple
- Rugged construction, high material qualitity, fine silver or gold plated contact material
- Various approvals available
-
Resistance thermometers with welded protection tube and measuring inset Description: The resistance thermometers with welded protection tube are used primarily for measuring temperatures in the operating range up to 600°C, 40 bar, 20 m/s in vessels and piplines. They are assembled from a welded protection tube featuring a connection head, into which an exchangeable measuring inset is fitted, and are used chiefly in liquid and gaseous media where moderate mechanical stress and low chemical aggressivity levels prevail. This design considerably facilitates the operational checks, since the measuring module – can be removed while the system is running without dismantling the entire sensor, – can be calibrated in the standard test facilities, – can be stocked as a universal standard module in order to assure availability of the system during replacement. In most cases, replacement by a new measuring inset is more reliable and less expensive than recalibration. Connection heads:- BUZ type, aluminium
- BUZH type, aluminium, for install. of transmitter
- BUKH type, polyamide, for install. of transmitter
-
The TTF300 HART temperature transmitter in proven 2-wire technology features a multitude of new functions and enhanced diagnostic information. The driver-independent configuration possibilities of the TTF300 are new and unique through the LCD display controlled by temperature transmitter and the DAT200 (Asset Vision Basic) device management tool or the FDT / DTM technology.In addition the TTF300 is also available with Foundation Fieldbus and Profibus protocol with the same functionality.
- Universal sensor input (RTD, thermocouple, Ohm, mV)
- Various sensor error-calibration possibilities (one point, two point, Callendar-van-Dusen)
- Sensor Backup / autom. Sensor redundancy switching (2 x Pt100 3-wire connection)
- Freestyle characteristics (32 supporting points)
- Output signal (temperature linear), 4 ... 20 mA, HART signal
- Accuracy 0.1 %, long-term stability 0.05 % per year
- IP 66 / IP 67, NEMA 4X aluminum or stainless steel field-mount housing
- Transmitter-controlled LCD display with TTF300 configuration options
-
The TTH200 HART temperature transmitter is the standard device of the new TTx200 / TTx300 product family in proven two-wire technology. The TTH200 is provided for all HART standard applications in temperature measurement with one sensor. The transmitter supports the same functionality as the TTH300, but without sensor redundancy and sensor drift monitoring and can be configured via FDT / DTM in DAT200 (Asset Vision Basic) or any standard FTD tool via EDD. Data:- Universal sensor input
- Various sensor error-calibration possibilities
- Output signal
- Accuracy 0.1 %, long-term stability 0.05 % per year
- Wire break / corrosion monitoring (NE89)
- Extended diagnostics (NE107)
- Approvals for explosion protection
-
The TTH300 HART, PROFIBUS PA or FOUNDATION Fieldbus temperature transmitter in proven two-wire technology features a multitude of new functions and enhanced diagnostic information. The head-mount temperature transmitter can be configured via FDT / DTM in DAT200 (Asset Vision Basic) or any standard FTD tool via EDD or local HMI (optional). For PROFIBUS the configuration is possible via GST-file, EDD or DTM and for FOUNDATION Fieldbus via EDD.Data:- Universal sensor input
- Various sensor error-calibration possibilities
- Sensor backup / automatic sensor redundancy switching (2 x Pt100 3-wire connection)
- Freestyle characteristics
- Output signal
- Accuracy 0.1 %, long-term stability 0.05 % per year
- Wire break / corrosion monitoring (NE89)
- Extended diagnostics (NE107)
- Approvals for explosion protection
-
Vibronic Point level detection Liquiphant FTL31 Point level switch for liquids in compact design with stainless steel housing Liquiphant FTL31 is a point level switch for liquids. The FTL31 is designed for industrial applications in all industries, mainly the machinery industry. The Liquiphant is used for overfill prevention or pump dry-run protection in cleaning and filter systems as well as in cooling and lubrication vessels. - Smallest vibronic sensor in the market - Continuous self-monitoring - Reliable switching independent of media properties - No calibration or adjustment - Plug & play Benefits:- Designed according to highest requirements to quality and environmental sustainability. The self-monitoring Liquiphant offers safe switching also in case of power supply loss
- Independent of changing media properties an accurate switching point is offered
- A real plug & play sensor is offered without any need for adjustment even with changing media. Measurement is unaffected by conductivity, build-up, turbulence, flows or air bubbles
- No calibration is required, no specific know-how or tools (e.g. software) necessary
- Robust design made of stainless steel (316L) assures highest durability
- A modular design offers different process temperatures and the widest variety of process connections and accessories in the market to fit every application
- No mechanically moved parts, free of maintenance
-
Absolute and gauge pressure Cerabar PMC71 Digital pressure transmitter with oil-free ceramic sensor for measurement in gases or liquids The Cerabar PMC71 digital pressure transmitter with capacitive, oil-free ceramic measuring cell is typically used in the process and hygienic applications for pressure, level, volume or mass measurement in liquids and gases. It guarantees high degree of system safety thanks to vacuum-proof ceramic membrane with integrated breakage detection. Quick Setup with adjustable measuring range allows simple commissioning, reduces costs and saves time. SIL2/3 according to IEC 61508. Benefits:- Best fit for vacuum applications and applications with corrosive and abrasive media
- Process safety through membrane breakage detection
- Overload-resistant high purity ceramic sensor (99.9% Al2O3)
- HistoROM data management concept for fast and easy commissioning, maintenance and diagnostics
- Easy menu-guided commissioning via local display, 4 to 20mA with HART, PROFIBUS PA, FOUNDATION Fieldbus
- Highest safety due to gastight feedthrough with capabilities up to SIL2/3, certified to IEC 61508
- Available with mounted manifolds: always fit, always tested for leaks
- Process connections: Threads, flanges or hygienic connections
- Process temperature: -40 to +150°C (-40 to +302°F)
- Measuring ranges: -1/0 up to to +40bar (+1.5 to +600psi)
- Accuracy: ±0.05%, "Platinum" ±0.025%
- International explosion protection certificates, overfill prevention WHG, SIL, hygienic approvals, marine approvals
-
Absolute and gauge pressure Cerabar PMP75 Digital pressure transmitter with fully welded diaphragm seal for measurement in gases or liquids The Cerabar PMP75 digital pressure transmitter with metal diaphragm seal is typically used in process and hygiene applications for pressure, level, volume or mass measurement in liquids or gases. Suitable for high pressure as well as extreme process temperature applications from -70 up to +400°C (-94 to 750°F). Quick Setup with adjustable measuring range allows simple commissioning, reduces costs and saves time. Designed according to IEC 61508 for use in SIL2/3 safety applications. Benefits:- Large variety of different process connections and membrane materials
- New TempC Membrane minimizes influences of ambient and process temperature fluctuations
- HistoROM data management concept for fast and easy commissioning, maintenance and diagnostics
- Easy menu-guided commissioning via local display, 4 to 20mA with HART, PROFIBUS PA, FOUNDATION Fieldbus
- Highest safety due to gas tight feedthrough with capabilities up to SIL2/3, certified to IEC 61508
- Cost savings with modular concept for easy replacement of sensor, display or electronics
- Overload-resistant and function-monitored from the measuring cell to the electronics
- Two chamber aluminum or stainless steel (316L) housing.
- Process connections: Threads, flanges or hygienic connections
- Process temperature: -70 to +400°C (-94 to +752°F)
- Pressure: -1/0 up to 400bar (-15/0 up to +6,000psi)
- Accuracy: ±0.075%
- International explosion protection certificates, overfill prevention WHG, SIL, hygienic approvals, marine approvals
-
The sensor with degree of protection IP68 (Type 6P enclosure) and a modular electronic concept Promag W is the specialized sensor for all applications in the water industry. Combined with the proven Promag 50 transmitter with push buttons, Promag 50W offers highly accurate measurement of liquids for a wide range of standard applications. Promag 50W is available in a compact or remote version. Benefits:- Secure, reliable long-term operation – robust and completely welded sensor
- Energy-saving flow measurement – no pressure loss due to cross-section constriction
- Maintenance-free – no moving parts
- Fast commissioning – application-specific Quick Setups
- Safe operation – display provides easy readable process information
- Fully industry compliant – IEC/EN/NAMUR
-
Ceraliquid CPS41: Analog pH sensor Glass electrode for applications with fast-changing medium compositions or low conductivity Ceraliquid CPS41D: Digital pH sensor Memosens glass electrode for the chemical and life sciences industries Application:- Media with very low conductivities or a high percentage of organic solvents or alcohols:
- Food industry
- Biotechnology
- Laboratory measurements
- Power plants
Your benefits:- Liquid KCl electrolyte enabling use at very low conductivities (≥ 0.1 µS/cm)
- Ceramic diaphragm with defined KCl flow
- Application under pressures of up to 10 bar / 145 psi with counter pressure
- Resistant to poisoning thanks to separate reference lead
- Suitable for CIP / SIP cleaning
- pH membrane glass suitable for steam sterilisation
- Four lengths available: 120, 225, 360 and 425 mm
- Available with built-in Pt 100, Pt 1000 or NTC temperature sensor
-
High precision average temperature measurement Prothermo NMT539 is an intelligent HART signal converter, with a combined average temperature sensor and water bottom interface probe. For average temperature measurement consists of precision multispot Pt100 elements. The NMT539 is a highly capable solution for constant average temperature data and water interface data via HART communication. For custody transfer and accurate inventory measurement, it is best suited connected to Proservo NMS5 or Tank Side Monitor NRF590 with Micropilot. Benefits:- Intrinsically safe device allowing for the safest electrical configuration possible
- Available in four different versions based on customer requirements:
- Converter is compatible with various element types in third party manufacturer temperature probes
- Compatible with Endress+Hauser's user friendly FieldCare
- Variety of process connections and cable entries available to meet worldwide classifications
- High reliability and easy installation
- Maintenance free
-
Vortex flow measuring system Reliable flow measurement of gas, steam and liquids Models:- Prowirl 72F / 72W
- Prowirl 73F / 73W
- Fluid temperature range from –200 to +400 °C
- Pressure ratings up to PN 250/Class 1500
- Sensor with integrated (optional) diameter reduction by one line size (R Style) or two line sizes (S Style)
- Dualsens version (optional) for redundant measurements with two sensors and electronics
- ATEX, FM, CSA, TIIS, NEPSI, IEC
- HART, PROFIBUS PA, FOUNDATION Fieldbus
- Pressure Equipment Directive, SIL 2
-
Waterpilot FMX21 Hydrostatic level measurement Compact device for level measurement in fresh water, wastewater and saltwater, communication via HART Application: The Waterpilot FMX21 is a pressure sensor for hydrostatic level measurement. Endress+Hauser offers three different versions of the FMX21 sensor:- FMX21 with a stainless steel housing, outer diameter of 22 mm (0.87 in): Standard version suitable for drinking water applications and for use in bore holes and wells with small diameters.
- FMX21 with a stainless steel housing, outer diameter of 42 mm (1.65 in): Heavy duty version, easy clean flush-mounted process diaphragm. Ideally suited for wastewater and sewage treatment plants.
- FMX21 with a plastic insulation, outer diameter of 29 mm (1.14 in): Corrosion resistant version generally for use in saltwater, particularly for ship ballast water tanks.
Your benefits:- High resistance to overload and aggressive media
- High-precision, robust ceramic measuring cell with long-term stability
- Climate proofed sensor thanks to completely potted electronics and 2-filter pressure compensation system
- 4 to 20 mA with superimposed HART 6.0 output signal
- Simultaneous measurement of level and temperature with optionally integrated Pt100 temperature sensor
- Accuracy:
– Reference accuracy ±0.2 % – PLATINUM version ±0.1 %- Automatic density compensation to increase accuracy
- Usage in drinking water: KTW, NSF, ACS
- Approvals: ATEX, FM, CSA
- Marine certificate: GL, ABS, LR, BV, DNV
- Extensive range of accessories provides complete measuring point solutions
-
Field of application :- Level
Measuring ranges :- from 100...+100 mbar to –3...+3 bar
Specialities(options) :- Abrasion-resistant and corrosion-resistant
- No diaphragm-seal temperature effects
- Metal-free measurement possible with ECTFE-coated process connection
-
Field of application :- Level
Measuring ranges :- from –100...+100 mbar to –16...+16 bar
Specialities(options) :- For high media temperatures
-
Field of application :- Level
- Differential pressure
Measuring ranges :- from –100...+100 mbar to –40...+40 bar
Specialities(options) :- Wide range of diaphragm seals
-
Field of application :- Flow
- Level
- Differential pressure
Measuring ranges :- from –25...+25 mbar to –3...+3 bar
Specialities(options) :- Metal-free measurement with PVDF flange
- Available with Deltatop/Deltaset as flow compact device
-
Field of application :- Flow
- Level
- Differential pressure
Measuring ranges :- from –10...+10 mbar to –40...+40 bar
Specialities(options) :- Pstat up to 420 bar
- Diaphragm: tantalum
- Available with Deltatop/Deltaset as flow compact device
-
Soliphant FTM50 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.Features and specifications :
- Process connections: Threads, flanges and hygienic connection (Tri-Clamp)
- Temperature: -50 to +280°C (-60 to +540°F)
- Pressure: -1 to +25bar (-14.5 to +360psi)
- Sensor length: 145mm, 200mm
- Sensor material: 316L (3,2µm, 0,8µm, PTFE coated, ETFE coated)
- International explosion protection certificates
-
Soliphant FTM51 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk. Features:- SIL2 in accordance with IEC 61508
- No mechanically moved parts, free of maintenance
- Measurement not affected by build-up or external vibration
- Various electronic inserts: e.g. NAMUR, relay, thyristor and PFM-signal outputs for optimum alignment with the plant control system
- Build-up and abrasion display selectable, density setting and switching delay selectable
- Choice of coated or polished sensor
- Build-up and corrosion detection
-
Soliphant FTM52 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.Features and specifications :
- Process connections: Threads, flanges and hygienic connection (Tri-Clamp)
- Temperature: -40 to +80°C (-40 to +170°F)
- Pressure: -1 to +2bar (-14.5 to +30psi)
- Sensor length: 750mm to 20,000mm
- Sensor material: 316L (3,2µm, 0,8µm, PTFE coated)
- International explosion protection certificates
-
The BM 26 is a simple, rugged instrument designed to indicate level or interface. It indicates level using a float magnetically coupled to an index or a column of rotating flaps. It is ideal for aggressive media stored in tanks when the PTFE lining option is used. For liquids with densities less than 0.5 kg/l / 31 lb/ft³, pressures more than 120 bar / 1740 psig and temperatures higher than 300°C / 570 °F, we recommend our BW 25 displacer-type level indicator.Highlights- Stainless steel design (optional NACE conformity)
- Proven technology
- Temperature range: -200…+300°C / -325…+570°F
- Pressure range: -1…120 bar / -14.5…1740 psig
- Density: 0.5…3 kg/l / 31…187 lb/ft³
- Float material options: 316L, 316 Ti and Titanium
- Stainless steel scale with wide choice of markings: m/cm, ft/in, %, volume etc.
- Less risk of leakage than a sight glass - little or no maintenance needed
- Easy to install
- Ideal for tanks with obstructed environments
- Optional indication of interface
- Optional approvals for EEx i or EEx d applications
Industries- Chemical and Petrochemical
- Oil and Gas
- Power
Applications- Boilers
- Condensators
- Hydrocarbons and Separators
- Liquid gas
- Process and storage tanks
- Steam cracking
-
Level measurement of liquids, even at high pressures using the displacement principle
- Modular assembly, replacement or retrofit without interruption of the process
- Pressure-tight separation of measuring and display parts
- Interface detection possible
- Displacement rod available 0.3 - 6 m (1 - 20 ft)
- Resistant to high pressures ≤ 400 bar (5800 psig) and high temperature ≤ 400°C (752°F)
- Current output 4...20 mA and/or max. 2 limit switches
Application range
The level indicator can be used for various liquids. This device is suitable for extreme operating conditions.
- Temperatures '60 - +400°C ('76 - +752°F)
- Pressure Up to 400 bar (5800 psig)
If the display cannot be installed from above, e.g. there is an agitator in the vessel, it is possible to install it lateral in a special reference chamber. In both cases it is important to note that the non-measurable depth is 340 mm because of the spring mounting.
With special versions it is possible to measure the interface between two immiscible liquids of different densities. The displacer must be covered completely with liquid. The difference in density should be min. 100 g/l.
Typical products are:
- Water, aqueous liquids
- Acids/alkalis
- Organic and inorganic solvents
- All kind of pure liquids
